Bondage Furniture Construction
You know the old saying "you get what you pay for".
We are a full time bondage furniture manufacturer and the largest in the world today.
We have been custom making bondage furniture for over 30+ years and we have access to lumber at the best prices and we use only kiln-dried wood in our furniture. To keep with the tradition of this evil furniture we keep all the defects including knots and any natural cracking in fact.
Note: Bondage furniture sizeing may vary smaller or larger depending on the item ordered, we are constantly updating our hardware to give you the best we can so hardware changes might not reflect in the photo.
We hand select our woods such as Douglas Fir, Spruce, Oak, Birch and Maple and all our furniture is built using screws, bolts, and glue and all wood surfaces are planed and sanded for smoothness, but again all wood defects are left in for that old bondage look. All edges are sanded to remove all sharp corners but the best part is our bondage furniture carries a full lifetime guarantee!!!
Will any one else give you all this???? That's why I said "you get what you pay for"
We see a lot of furniture today using pine, we don't use Pine in our furniture because Pine is a soft wood and if we did we would not be able to guarantee our furniture ... IT WOULD NOT HOLD UP over time.
All of our finishes are water base and mixed with polyurethane (unless you request oil base paint) to make the best and hardest finish to ensure the finish will last as long as the furniture.
Custom finishes are available and will carry an additional charge that varies depending on the finish complexity and size of the item.
|Copyright 1994 - 2018 Toys4Lust.com All rights reserved|